Metrel OmegaPAT Plus MI 3305 Kit 3 - Data Management PAT Tester Kit
£1,129.00+VAT x qty
£1,354.80 inc VAT
OmegaPAT Plus MI 3305 Kit 3 - Data Management PAT Tester Kit Overview
PAT Testers with an inbuilt lead length calculator for long cables and extension leads will save a lot of headaches.
Generally, PAT Testers with a memory can be downloaded to reporting software. This can then be made into reports.
100mA
25A
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.
Flash Testing is a high tension insulation test which is no longer a requirement in normal PAT Testing. The only time it is required is after the replacement of a major component in an appliance, such as a motor.
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).
4000
This allows the tester to store an allocated number of tests. Results can be downloaded into reporting software but can only be viewed on screen if it is a manual PAT tester.
These PAT Testers offer a wider range of tests and are powered by a mains socket.
A Printer can speed up your PAT Testing a great deal. If you require a printer, then you must choose a PAT Tester with printer compatibility.
Most industrial and construction equipment is powered by 110v. A 110v Run Test (also known as Load Test) is required for this.
A scanner can speed up your PAT Testing a great deal. If you require a scanner, then you must choose a PAT Tester with scanner compatibility.
250
500V
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.
9.0Kg
If you need to walk between tests make sure you pick a PAT Tester with a comfortable weight.
A manufacturer calibration certificate is included with these PAT Testers. This certificate starts from the date of manufacture, so it is recommended that you still add a new calibration certificate.
Many newer PAT testers incorporate this test because it is a requirement of the IEE Code of Practice 3rd Edition.
The Omega PAT from Metrel is one of their top of the range testers and comes complete with a wide range of testing capabilities to ensure PAT technicians can perform any test required with ease.
Metrel have ensured that the MI3305 can withstand tough knocks and bumps by placing it in a hard and strong carry case with built in handle. It can also be connected to both 115V and 230V mains voltage and is suitable for many applications including; ensuring electrical safety in workshops, discovering and solving problems and periodic PAT testing, to name a few.
With over 100 auto and 50 customisable test sequences programmed into the Omega PAT, it can quickly and easily perform most required PAT tests.
The Metrel OmegaPAT is a well made tester ideal for anyone who needs to carry out high volumes of testing and the QWERTY keyboard provides quick data entering possibilities.
Metrel OmegaPAT Plus MI 3305 Supported Tests
- Earth Bond Continuity with currents up to 25 A
- Insulation Resistance
- Leakage Current (differentinal, substitute and touch)
- Functional test
- Dielectric Withstanding test 1500 V and 3000 V AC (Flash test)
- Polarity test of IEC cord
- TRMS Leakage and Load Current measurement using clamp current adapter and Trip-Out Time measurement of portable RCDs
Metrel OmegaPAT Plus MI 3305 Key Features
- USB support
- User-friendly graphic interface (GUI)
- Instrument personalisation possible
- Barcode reader and serial printer supported
- Save auto test results with important information
- Quickly search test results using special filters
- Downloading and uploading auto test results to/from PC, test results comparison/trends and label printing
Metrel OmegaPAT Plus MI 3305 Suitability
- PAT Technicians
- Electrical Contractors
- Facilities Managers
- Schools, Colleges and Universities
- High volume testing
Metrel OmegaPAT Plus MI 3305 Includes
- Metrel OmegaPAT PAT Tester
- Metrel MI 3305 instruction manual
- Earth Bond Clip
- Flash test probe
- PRCD test probe
- PC SW PAT Link with RS232 and USB cable
- Product verification data
- Calibration certificate
- Free delivery
Download Technical PDFs For Further Information On This Product
Help Centre
At PAT Testers we have a comprehensive Help Centre with dozens of answer FAQs and supporting videos. Some related FAQs are below and if you still need some help, why not seach our PAT Tester Help Centre.
- What Qualifications Do I Need To PAT Test?
- Do I Have To Test Laptops Differently To IT Equipment?
- Why Does My Kewtech KT71 Fail Computers?
- What do I need to know about PAT testing and earth leakage
- Do I Have To Label IEC Leads And The Computer Separately?
Search Help Centre
Looking for a specific help sheet or video? Then enter you query below and search our comprehensive database for the answer.
