Battery Powered
These PAT Testers offer great flexibility as there is no need to plug them into a mains socket.
Manual
PAT Testers without memory require you to record results in a PAT Log Book. Results can be manually typed into software to create reports.
Extension Lead Test
PAT Testers with an inbuilt lead length calculator for long cables and extension leads will save a lot of headaches.

200mA
Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.
Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

250
500V
Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

0.8Kg
Weight
If you need to walk between tests make sure you pick a PAT Tester with a comfortable weight.
RCD Test
Many newer PAT testers incorporate this test because it is a requirement of the IEE Code of Practice 3rd Edition.
Seaward PrimeTest 250 PAT Tester Kit 2 comes supplied with
-
The Essential Guide to PAT Testing Training DVD - PAT testing course on DVD with free online exam and qualification
-
SimplyPats Manual Software
-
500 Passed Labels
-
500 Failed Labels
-
500 Cable Wraps
-
240v Plug to 10amp IEC Lead for testing 240v Extension Cables
-
110v Socket to 10amp IEC Lead for testing 110v Extension Cables
-
PAT Testing Log book (to record your test results)
-
Deluxe Carry Case for easy transportation and protection of your PAT testing Kit! Comes with customisable foam, so you can snugly fit whatever equipment you would like to take on site inside.
Seaward PrimeTest 250 PAT Tester also comes with
-
Seaward PrimeTest 250 PAT Tester
-
Seaward PrimeTest 250 soft carry case
-
Seaward PrimeTest 250 user manual
-
Earth bond test lead
-
6 x AA batteries
-
Mains lead
-
240v IEC test lead
-
12 month manufacturer warranty
Further information:
-
Calibration certificate NOT included
-
Free delivery included
Seaward PrimeTest 250 PAT Tester Description
This easy to use PAT tester uses a simple 6 button design to carry out PAT testing, as well as RCD and three phase testing.
If you are looking for a PAT tester with optional RCD and three phase testing, then look no further than the Seaward PrimeTest 250. One major advantage over the Seaward PrimeTest 100 is the ability to soft test IT equipment with a 250v DC insulation test.
The PrimeTest 250 PAT Tester can carry out the full range of PAT tests on 6 x AA batteries. When plugged into a mains socket, the PrimeTest 250 can carry out RCD testing*, three phase testing* and power socket checking.
As well as testing 240v equipment found in the workplace, the Seaward PrimeTest 250 PAT Tester can test three phase equipment found on building sites and in factories. This makes the PrimeTest 250 an ideal piece of kit for contractors and engineers.
Designed for ease of use, the PrimeTest 250 PAT Tester adopts a simple one button per test approach. An ideal feature for novice users is the ability to test against pre-set pass and fail levels.
*Please note that additional accessories are required for 3 phase and RCD testing.
For features and suitability please see the main Seaward PrimeTest 250 product page.