Manual
PAT Testers without memory require you to record results in a PAT Log Book. Results can be manually typed into software to create reports.
Extension Lead Test
PAT Testers with an inbuilt lead length calculator for long cables and extension leads will save a lot of headaches.

100mA
8A 25A
Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.
Flash Test
Flash Testing is a high tension insulation test which is no longer a requirement in normal PAT Testing. The only time it is required is after the replacement of a major component in an appliance, such as a motor.
Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).
Mains Powered
These PAT Testers offer a wider range of tests and are powered by a mains socket.
110v Run Test
Most industrial and construction equipment is powered by 110v. A 110v Run Test (also known as Load Test) is required for this.

500V
Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

5.1Kg
Weight
If you need to walk between tests make sure you pick a PAT Tester with a comfortable weight.
Comply to IEE standards with this Martindale EasyPAT 2100 PAT Tester Kit with Radiation Leakage Detector and accessories.
Martindale EasyPAT 2100 PAT Tester Kit 3 comes supplied with
-
The Essential Guide to PAT Testing Training DVD - PAT testing course on DVD with free online exam and qualification
-
Microwave Leakage Detector
-
Seaward PATGuard Elements Manual Software
-
500 Passed Labels
-
500 Failed Labels
-
500 Cable Wraps
-
240v Plug to 10amp IEC Lead for testing 240v Extension Cables
-
110v Socket to 10amp IEC Lead for testing 110v Extension Cables
-
Martindale CP501 Socket Tester
Martindale EasyPAT 2100 PAT Tester also comes with
-
Martindale EPAT2100 PAT Tester
-
Martindale EPAT2100 soft carry bag
-
Martindale EPAT2100 instruction manual
-
Adaptor to test 230V plug to socket leads
-
Earth bond test lead
-
Flash gun
-
240v IEC lead
-
Logbook
Further information:
-
Calibration certificate NOT included
-
Free delivery included
Martindale EasyPAT 2100 PAT Tester description
The Easy PAT microwave leakage kit from Martindale Electric is a tester capable of dual voltage testing at 240v and 110v.
With its easy push button test selection, for ease of use and the maximisation of productivity and testing, this tester can perform at high speeds.
The easy to read visual display and very high specifications, make this portable appliance tester one of the most outstanding PAT testers on the market.
A manual PAT tester that can perform a flash test, useful for appliances that have had repairs, also includes, pass and fail labels, cable wraps, microwave leakage detector, PAT log book, 240v and 110v IEC test leads, PAT testing training DVD, CP501 socket tester and Simply Pats Manual v6.
The microwave leakage PAT tester kit has a sturdy, hard-wearing outer case that is easy to use and store. It is a kit that is suitable for all testers and technicians and would be a positive investment for all.
For features and suitability see the main Martindale EasyPAT 2100 page.