Megger PAT350 PAT Tester

The PAT 350 from Megger is from the PAT300 range of PAT testers and features a wide range of tests which fall under regulation requirements.

With dedicated test buttons, the Megger PAT 350 can perform a full range of tests including:

• Class I,
• Class II,
• IEC Power Lead Test,
• Extension Cable Test,
• Portable RCD Test,
• Flash Test.

Also worth noting, the PAT 350 comes with an automatic mode for Class I and Class II testing. This means that when selected, the tests will automatically run after one another showing either a pass or fail result once each test is complete.

If however, during the course of testing in automatic mode a fail result occurs, the PAT 350 will stop testing procedure immediately.

When the PAT technician is testing in manual mode, a screen with selection options and test parameter settings can be fixed. This menu selection screen also allows for individual tests to be performed if an item has undergone a repair on one particular failing aspect and needs to be retested.

This feature allows testing to become easier and time to be saved, making the PAT 350 an ideal investment. The new Megger PAT350 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.

This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT350 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.

The Megger PAT350 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. It also has the ability to carry out Flash Tests. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.

If a fail occurs, the Megger PAT350 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.

Also available in this range is the Megger PAT320. This has all the features of the Megger PAT350 only without the added capability of Flash Test.

Megger PAT350 key features

• Flash test
• Simple manual or automatic testing
• 230 V and 110 V operation
• Bond testing at 25 A,10 A and 200 mA
• Differential, touch and substitute leakage testing
• Full colour display
• Tests portable RCDs and extension leads

Megger PAT350 suitability

• Bed and breakfasts / hotels
• Electrical contractors
• PAT organisations
• Maintenance and facilities companies

Megger PAT350 comes supplied with

• Megger PAT350 PAT Tester
• Megger PAT350 carry case
• Combined earth-bond and insulation test lead
• Adaptor for testing extension leads

Further Information:

• Calibration certificate NOT included
• Free delivery included