Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.

Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

500V

Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

0.8Kg

Weight
If you need to walk between tests make sure you pick a PAT Tester with a comfortable weight.

Description

The Seaward PrimeTest 200 is a 3-IN-1 MULTI-TESTER.

The Seaward PrimeTest 200 battery powered PAT Tester is fast, efficient and convenient. It is ideal for service companies and maintenance staff who have to carry out PAT Testing, installation checking, digital multimeter readings and temperature measurements.

There is nothing worse than carrying a ton of equipment around on site to do a few simple tests. The Seaward PrimeTest 200 is the answer! Class I, Class II and IT equipment test are a doddle, as are Installation Tests or DMM readings.

Ten measurement functions make the Seaward PrimeTest 200 a very versatile answer to any professional testers toolbox. Designed to be hand held, the Seaward PrimeTest 200 is easy to use and totally effective.

Battery power makes this PAT Tester light and portable, and with no cables to slow you down, you will be flying from job to job. Heavy duty casing ensures the Seaward PrimeTest 200 is going to last a very long time.

Seaward PrimeTest 200 key features

Battery driven for mains free working
Rotary switch test selection
Single test button action
Tests Class I and Class II equipment
Tests Extension and IEC leads
Insulation, Continuity, Socket polarity and RCD tests
Clear pass/fail indication for easy use

Seaward PrimeTest 200 suitability

PAT testers
Service companies
Electricians

Seaward PrimeTest 200 comes supplied with

Seaward PrimeTest 200 PAT Tester
Seaward PrimeTest 200 carry case
Seaward PrimeTest 200 user manual
Lead set
6 AA batteries
240v Plug to 10amp IEC lead for testing 240v extension cables
Instruction manual
Soft carry case

Please note this PAT Tester does NOT come with a Calibration Certificate

PATFINDER

Too many to choose from? Use the quick quide:

Show me....

All PAT Testers

Basic PAT Testers

Mid-Range PAT Testers

Professional PAT Testers

What features would you like your PAT tester to have?

Battery Powered
These PAT Testers offer great flexibility as there is no need to plug them into a mains socket.

Manual
PAT Testers without memory require you to record results in a PAT Log Book. Results can be manually typed into software to create reports.

Extension Lead Test
PAT Testers with an inbuilt lead length calculator for long cables and extension leads will save a lot of headaches.

Downloadable
Generally, PAT Testers with a memory can be downloaded to reporting software. This can then be made into reports.

Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.

Flash Test
Flash Testing is a high tension insulation test which is no longer a requirement in normal PAT Testing. The only time it is required is after the replacement of a major component in an appliance, such as a motor.

Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

Tester Has Memory
This allows the tester to store an allocated number of tests. These results can then be downloaded into reporting software.

Mains Powered
These PAT Testers offer a wider range of tests and are powered by a mains socket.

Connects To Printer
A Printer can speed up your PAT Testing a great deal. If you require a printer, then you must choose a PAT Tester with printer compatibility.

110v Run Test
Most industrial and construction equipment is powered by 110v. A 110v Run Test (also known as Load Test) is required for this.

Connects To Scanner
A scanner can speed up your PAT Testing a great deal. If you require a scanner, then you must choose a PAT Tester with scanner compatibility.

Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

Calibration Included
A manufacturer calibration certificate is included with these PAT Testers. This certificate starts from the date of manufacture, so it is recommended that you still add a new calibration certificate.

Features