Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.

Flash Test
Flash Testing is a high tension insulation test which is no longer a requirement in normal PAT Testing. The only time it is required is after the replacement of a major component in an appliance, such as a motor.

Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

4000

Tester Has Memory
This allows the tester to store an allocated number of tests. These results can then be downloaded into reporting software.

Mains Powered
These PAT Testers offer a wider range of tests and are powered by a mains socket.

Connects To Printer
A Printer can speed up your PAT Testing a great deal. If you require a printer, then you must choose a PAT Tester with printer compatibility.

110v Run Test
Most industrial and construction equipment is powered by 110v. A 110v Run Test (also known as Load Test) is required for this.

Connects To Scanner
A scanner can speed up your PAT Testing a great deal. If you require a scanner, then you must choose a PAT Tester with scanner compatibility.

250
500V

Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

9Kg

Weight
If you need to walk between tests make sure you pick a PAT Tester with a comfortable weight.

Calibration Included
A manufacturer calibration certificate is included with these PAT Testers. This certificate starts from the date of manufacture, so it is recommended that you still add a new calibration certificate.

Description

Metrel’s top of the range PAT Tester is capable of testing portable electrical appliances, IT equipment, IEC cords and portable RCDs with corresponding IEC/EN and VDE standards.

The NEW Metrel OmegaPAT Plus MI 3305 is suitable for periodic testing, troubleshooting or as a tool for electrical safety in workshops. It can be connected to 115 V and 230 V mains supply voltage. Instruments are placed in robust, waterproof case with build in carrying handle.

This PAT Tester has all the functions to speed up your PAT Testing. The OmegaPAT Plus MI 3305 comes with over 100 pre-programmed auto test sequences, covering most of the test requirements you will come across. You can also define up to 50 additional customised auto tests. Full QWERTY keyboard allows easy data entries.

Metrel OmegaPAT Plus MI 3305 supported tests

Earth bond continuity test with currents up to 25 A
Insulation resistance
Leakage current (differentinal, substitute and touch)
Functional test
Dielectric withstanding test 1500 V and 3000 V AC (Flash test)
Polarity test of IEC cord
TRMS leakage and load current measurement using clamp current adapter and Trip-out time measurement of portable RCDs

Metrel OmegaPAT Plus MI 3305 key features

USB support
User-friendly graphic user interface (GUI)
Instrument personalisation to user needs
Barcode reader and serial printer support
Saving auto test results with important information
Quickly searching of test results using special filters
Downloading/uploading auto test results to/from PC, test results comparison/trends and label printing

Metrel OmegaPAT Plus MI 3305 suitability

PAT testers
Electrical contractors
Facilities managers
Schools, colleges and universities
High volume testing

Metrel OmegaPAT Plus MI 3305 comes supplied with

Metrel OmegaPAT Plus MI 3305 PAT Tester
Metrel OmegaPAT Plus MI 3305 instruction manual
Earth Bond Clip
Flash test probe
PRCD test probe
PC SW PAT Link with RS232 and USB cable
Product verification data

This PAT Tester comes with a Calibration Certificate

PATFINDER

Too many to choose from? Use the quick quide:

Show me....

All PAT Testers

Basic PAT Testers

Mid-Range PAT Testers

Professional PAT Testers

What features would you like your PAT tester to have?

Battery Powered
These PAT Testers offer great flexibility as there is no need to plug them into a mains socket.

Manual
PAT Testers without memory require you to record results in a PAT Log Book. Results can be manually typed into software to create reports.