Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.

Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

Mains Powered
These PAT Testers offer a wider range of tests and are powered by a mains socket.

250
500V

Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

4.5Kg

Weight
If you need to walk between tests make sure you pick a PAT Tester with a comfortable weight.

Description

The new Megger PAT320 PAT Tester is one of two new Portable Appliance Testers from Meggers PAT 300 range.

This portable PAT Tester is ideal for testing all electrical equipment to meet Health and Safety regulations. The Megger PAT320 PAT Tester is a fully featured tester with dedicated test buttons for direct access to tests.

The Megger PAT320 can test a full range of electrical items including Class I, Class II, IEC Power Leads, Extension Leads and full tests for portable RCDs. An automatic mode is available for Class I and Class II testing. In automatic mode, the tests proceed sequentially through bond, insulation and operation, indicating a pass or fail at each test.

If a fail occurs, the Megger PAT320 stops testing. When manual testing, each test is preceded by a selection screen where the test parameters are selected, such as bond test current, insulation test voltage or leakage test type. These diagnostic buttons provide direct access to any test individually, allowing single tests to be performed following repair or a suspect result.

Also available in this range is the Megger PAT350. This has the same features as the Megger PAT320 but with Flash Test capability.

Megger PAT320 key features

Simple manual or automatic testing
230 V and 110 V operation
Bond testing at 25 A,10 A and 200 mA
Differential, touch and substitute leakage testing
Full colour display
Tests portable RCDs and extension leads

Megger PAT320 suitability

Bed and breakfasts / hotels
Electrical contractors
PAT organisations
Maintenance and facilities companies

Megger PAT320 comes supplied with

Megger PAT320 PAT Tester
Megger PAT320 carry case
Combined earth-bond and insulation test lead
Adaptor for testing extension leads

This PAT Tester comes with a Calibration Certificate

PATFINDER

Too many to choose from? Use the quick quide:

Show me....

All PAT Testers

Basic PAT Testers

Mid-Range PAT Testers

Professional PAT Testers

What features would you like your PAT tester to have?

Battery Powered
These PAT Testers offer great flexibility as there is no need to plug them into a mains socket.

Manual
PAT Testers without memory require you to record results in a PAT Log Book. Results can be manually typed into software to create reports.

Extension Lead Test
PAT Testers with an inbuilt lead length calculator for long cables and extension leads will save a lot of headaches.

Downloadable
Generally, PAT Testers with a memory can be downloaded to reporting software. This can then be made into reports.

Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.

Flash Test
Flash Testing is a high tension insulation test which is no longer a requirement in normal PAT Testing. The only time it is required is after the replacement of a major component in an appliance, such as a motor.

Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

Tester Has Memory
This allows the tester to store an allocated number of tests. These results can then be downloaded into reporting software.

Mains Powered
These PAT Testers offer a wider range of tests and are powered by a mains socket.

Connects To Printer
A Printer can speed up your PAT Testing a great deal. If you require a printer, then you must choose a PAT Tester with printer compatibility.

110v Run Test
Most industrial and construction equipment is powered by 110v. A 110v Run Test (also known as Load Test) is required for this.

Connects To Scanner
A scanner can speed up your PAT Testing a great deal. If you require a scanner, then you must choose a PAT Tester with scanner compatibility.

Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

Calibration Included
A manufacturer calibration certificate is included with these PAT Testers. This certificate starts from the date of manufacture, so it is recommended that you still add a new calibration certificate.

Features