Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.

Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

1800

Tester Has Memory
This allows the tester to store an allocated number of tests. These results can then be downloaded into reporting software.

Mains Powered
These PAT Testers offer a wider range of tests and are powered by a mains socket.

110v Run Test
Most industrial and construction equipment is powered by 110v. A 110v Run Test (also known as Load Test) is required for this.

Connects To Scanner
A scanner can speed up your PAT Testing a great deal. If you require a scanner, then you must choose a PAT Tester with scanner compatibility.

250
500V

Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

7.5Kg

Weight
If you need to walk between tests make sure you pick a PAT Tester with a comfortable weight.

Description

The Kewtech KT74 PAT Tester is a modern downloadable tester that is pre-programmed with ten automatic tests to speed up testing. It stores up to 1800 test results which can then be transferred via its inbuilt USB port - This is one of a few PAT Testers on the current market with this facility.

This is a dual voltage PAT Tester which can carry out Earth Bond Continuity Tests at 100mA, 10A and 26A, Insulation Test 250/500V DC, Earth Leakage Test, Load/Run Test, Fuse Test and Fuse Check. the Kewtech KT74 PAT Tester also tests Extension Leads and IEC Leads.

It comes fitted with a handle and in its own hard case which will protect against hard knocks.

Kewtech KT74 key features

Downloadable
Earth bond 100mA/10A/26A
Earth bond null
100V/230V appliances
Ten pre-programmed Auto tests
Fuse test and fuse check
Earth leakage
Insulation test 250/500V DC
Load test
USB memory port for fast and convenient transfer of data

Kewtech KT74 suitability

PAT testers
Facilities managers
Schools, colleges and universities
Electrical contractors
High volume testing

Kewtech KT74 comes supplied with

Kewtech KT74 PAT Tester
Kewtech KT74 instruction manual
Mains lead
Earth bond test lead
128mb USB memory stick

This PAT Tester comes with a Calibration Certificate

PATFINDER

Too many to choose from? Use the quick quide:

Show me....

All PAT Testers

Basic PAT Testers

Mid-Range PAT Testers

Professional PAT Testers

What features would you like your PAT tester to have?

Battery Powered
These PAT Testers offer great flexibility as there is no need to plug them into a mains socket.

Manual
PAT Testers without memory require you to record results in a PAT Log Book. Results can be manually typed into software to create reports.

Extension Lead Test
PAT Testers with an inbuilt lead length calculator for long cables and extension leads will save a lot of headaches.

Downloadable
Generally, PAT Testers with a memory can be downloaded to reporting software. This can then be made into reports.

Earth Bond Test
The Earth Bond Test (Earth Continuity Test) is carried out on all earthed appliances. An Earth Bond Test shows whether the earth conductor is in a satisfactory condition.

Flash Test
Flash Testing is a high tension insulation test which is no longer a requirement in normal PAT Testing. The only time it is required is after the replacement of a major component in an appliance, such as a motor.

Tests IT Equipment
This PAT Tester is suitable for testing IT and electronic equipment with a low current Earth Bond Test (usually either 100mA or 200mA).

Tester Has Memory
This allows the tester to store an allocated number of tests. These results can then be downloaded into reporting software.

Mains Powered
These PAT Testers offer a wider range of tests and are powered by a mains socket.

Connects To Printer
A Printer can speed up your PAT Testing a great deal. If you require a printer, then you must choose a PAT Tester with printer compatibility.

110v Run Test
Most industrial and construction equipment is powered by 110v. A 110v Run Test (also known as Load Test) is required for this.

Connects To Scanner
A scanner can speed up your PAT Testing a great deal. If you require a scanner, then you must choose a PAT Tester with scanner compatibility.

Insulation Test
The Insulation Test measures the insulation resistance of a device under test. A 250v Insulation Test overcomes problems in testing surge protected extension leads.

Calibration Included
A manufacturer calibration certificate is included with these PAT Testers. This certificate starts from the date of manufacture, so it is recommended that you still add a new calibration certificate.

Features